If you have a problem with your USB composite device like them does not work properly with USB 3.0 then don't worry, this guide will help you fix this problem. It is truly a happy time that you bought a new laptop with the latest configuration. You may have heard that for faster file transfer using USB ports, USB 3.0 is the most sought after port. Thus, most devices come with this configuration only. You can forget that though, what if you have an older printer that can't work on the latest USB 3.0 ports?
"The USB device is an older USB device and may not work with USB 3.0"
Most older devices work on USB 2.0 ports. It means that you will experience some problems connecting older devices with the latest USB 3.0 port. One of the most common errors you experience is "The USB composite device cannot work properly with USB 3.0." However, in some cases, users do not experience any problems plugging the old printer into the USB 3.0 port. Don't worry, you don't need to panic or throw away your old printer because we are going to clarify some methods to fix USB composite device can't work properly with USB 3.0 problem.
Fix USB composite device cannot work properly with USB 3.0
Make sure to create a restore point in case something goes wrong.
Method 1: update the USB driver
Sometimes it's about the driver. If it is corrupted, updated or missing, you may face the above problem.
1.Press Windows key + R later write devmgmt.msc and Enter to open Device Manager.
2.Expand Universal serial bus controllers.
3.Right click on Generic USB hub and select "Update driver."
4.Now select Busque en mi computadora el software del controlador.
5.Click Let me select from a list of drivers on my computer.
6.Select Generic USB hub from the list of drivers and click Next.
7.Wait for Windows to finish installing and then click Shut down.
8. Make sure to follow steps 4 to 8 for all «Generis USB hub”Present in universal serial bus controllers.
9.If the problem is still not resolved, follow the steps above for all devices listed in Universal serial bus controllers.
This method may be able to Fix USB composite device cannot work properly with USB 3.0If not, continue.
Method 2: reinstall USB drivers
Another method you can rely on is to disable and re-enable your USB drivers. The problem is likely to be with the USB controller. You do not need to worry as you go through the steps to perform this procedure as it is absolutely harmless to your system.
1.Open Device Manager. Press Windows + R and type «devmgmt.msC ».
2.Here you need to click Universal Serial Bus Controllers and expand this option.
3.Here you have to right click on each USB controller and choose the Uninstall option.
4.You need repeat the same process with everything available USB drivers listed under Universal Serial Bus Controllers.
5. In short, once you are done with the uninstall procedure, you need to reboot your system.
6. Al reiniciar su sistema, Windows de forma automática escaneará su sistema de cambios de hardware e instalará todos los controladores faltantes.
Method 3: enable legacy USB support in BIOS
If you are still struggling with this problem, you can go for this method. You only need to have access to your BIOS settings to check if USB legacy support is enabled or not. If it is not enabled, you must enable it. Hopefully it will solve our problem.
1.Shut down your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on its manufacturer) to access in BIOS setup.
2.Navigate to Advanced using the arrow keys.
3.Go to USB configuration and subsequently Enable legacy USB support.
4. Exit save changes and check if you can The USB Fix device is an old USB device and it may not work with the USB 3.0 problem.
Method 4: prevent Windows from turning off devices
Have you ever noticed that for a moment your printer goes online and then goes offline? Yes, there could be a Windows glitch that automatically shuts down the device to save power. It usually happens just to save power on most devices, specifically laptops.
1.Press Windows + R and type «devmgmt.mscAnd hit Enter to open Device Manager.
2.You need to navigate to USB serial device drivers.
3.You need to locate the USB root hub and later the right button of the mouse in each Home connection for USB and navigate to Properties and choose the Power Management tab.
4.Here you need uncheck box "Allow the computer to turn off this device to save power". In short, save your settings.
5. Restart your system and try connecting your printer again.
Method 5 - USB 2.0 expansion card
Unfortunately, if none of the previously mentioned methods worked well to fix USB composite device cannot work properly with USB 3.0, you can buy USB 2.0 expansion card to connect your old printer with your new laptop.
Method 6 – Run the Hardware and Devices troubleshooter
1.Press Windows key + I to open Settings and then click Update and security icon.
2.In the menu on the left, be sure to choose Solve problems.
3. Now, in the "Find and solve other problems" section, click on "Hardware and Devices".
4.Then click Run the troubleshooter and follow the onscreen instructions to Fix USB composite device cannot work properly with USB 3.0.
Method 7: Windows USB troubleshooter
Windows has its own troubleshooting section to help all Windows users. You can easily get help directly from Microsoft to fix your problem. This web-based diagnostic and repair tool Windows will automatically detect the problem and fix it or give you ideas on how to fix it.
Hopefully these solutions will help you fix your problem. Also there might be other possible solutions, but we have included the most effective solutions to fix the USB composite device not working properly problem. All it takes to make sure you follow the steps consistently so that you can expect the result correctly.
Recommended:
Espero que este post haya sido útil y que ahora pueda Fix USB composite device cannot work properly with USB 3.0But if you still have any doubts regarding this tutorial, feel free to ask them in the comment section.
