Skip to main content

If you get ERR_NETWORK_CHANGED error in Google Chrome on Windows 10, it means that your internet connection or browser is preventing you from loading the page. The error message clearly indicates that Chrome cannot enter the network and thus the error. There are several issues that can cause this error so there are different methods and you should try all of them as what might work for one user might not work for another.

fix-err_network_changed-in-chrome-2381284

Cannot enter the network
ERR_NETWORK_CHANGED

OR

Your connection was interrupted
A network change was detected
Check your internet connection

Now Google, Gmail, Facebook, YouTube, etc. all types of websites are affected by this error, and that is why this error is so annoying. You won't be able to get into anything in Chrome until you fix the problem. So without giving up time, let's see how to truly solve ERR_NETWORK_CHANGED in Chrome with the troubleshooting tutorial listed below.

Note: Make sure to uninstall any VPN software you have on your computer before continuing.

Fix ERR_NETWORK_CHANGED in Chrome

Make sure to create a restore point in case something goes wrong.

Method 1: restart your modem

Sometimes restarting your modem can solve this problem, as the network may have experienced some technical issues that can only be resolved by restarting your modem. If you are still unable to resolve this issue, please follow the next method.

Method 2: Clear DNS and Reset TCP / IP

1. Open the command prompt. The user can perform this step by searching 'cmd' and then press Enter.

Open command prompt. The user can perform this step by searching for 'cmd' and then pressing Enter.

2. Now type the following command and press Access after each one:

ipconfig / release
ipconfig / flushdns
ipconfig / renew

flush-dns-1474832

3. Again, open the Management Command Prompt and type the following and hit enter after each one:

ipconfig / flushdns nbtstat –r netsh int ip reset netsh winsock reset

netsh-int-ip-reset-8094443

4. Reboot to apply the changes. Clean DNS seems fix ethernet does not haveyou see a valid IP configuration error.

Method 3: disable and enable your NIC (network interface card)

1. Press Windows key + R, then write ncpa.cpl and hit enter.

ncpa-cpl-to-open-wifi-settings-7960902

2. Now right click on the NIC you are facing the problem.

3. select Deactivate and again Allow after a few minutes.

right-click-on-your-wireless-adapter-and-select-disable-2159761

right-click-on-the-same-adapter-and-this-time-choose-enable-1-6643443

4. Wait until you are successful receives an IP address.

5. If the problem persists, type the following commands in cmd:

ipconfig / release ipconfig / flushdns ipconfig / renew

flush-dns-1474832

6. Restart your computer and see if you can fix the error.

Method 3: remove browsing data in Chrome

1. Open Google Chrome and tap Ctrl + H to open the story.

2. Then click Clear browsing data from the left panel.

clear-browsing-data-2858094

3. Make sure that «beginning of time« is selected in Delete the following items from.

4. At the same time, check the following:

  • Browsing history
  • Download history
  • Cookies and other parental data and plugins
  • Cached images and files
  • Autocomplete form data
  • Passwords

clear-chrome-history-since-the-beginning-of-time-8086011

5. Now click Clear browsing data and wait for it to finish.

6. Close your browser and restart your computer. Now reopen Chrome and see if you can Fix ERR_NETWORK_CHANGED in Chrome if not, continue with the next method.

Method 4: use Google DNS

1. The right button of the mouse about him network icon (LAN) at the far right of the taskbarand click Open Network and Internet Settings.

right-click-on-the-wi-fi-or-ethernet-icon-then-select-open-network-internet-settings-3857215

2. In the settings application that opens, click Change adapter alternatives in the right panel.

click-change-adapter-options-8210837

3. The right button of the mouse on the network you want to configure and click Properties.

right-click-on-your-network-connection-and-then-click-on-properties-8676987

4. Click Internet Protocol version 4 (IPv4) in the listing and then click Properties.

select-internet-protocol-version-4-tcpipv4-and-again-click-on-the-properties-button-2144240

Read also: Fix your DNS server might not be available error

5. On the General tab, choose 'Use the following DNS server addresses'and put the following DNS addresses.

Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

use-the-following-dns-server-addresses-in-ipv4-settings-5218227

6. Finally, click okay at the bottom of the window to store the changes.

7. Restart your computer and once the system restarts, see if you can fix YouTube videos not loading. "An error occurred, please try again later."

6.Close everything and it is feasible that you can Fix ERR_NETWORK_CHANGED in Chrome.

Method 5: uncheck Proxy

1. Press Windows Key + R, and then type inetcpl.cpl and hit enter to open Internet properties.

intelcpl-cpl-to-open-internet-properties-2152392

2. Then go to Connections tab and select LAN Settings.

move-to-connections-tab-and-click-on-lan-settings-button-3491554

3. Uncheck Use a proxy server for your LAN and make sure to «Automatically detect settings" It is checked.

use-a-proxy-server-for-your-lan-7051056

4. Click okay then apply and restart your computer.

Method 7: reinstall your network adapter drivers

1. Press Windows Key + R, and then type devmgmt.msc and press Login to open Device Manager.

devmgmt-msc-device-manager-3855159

2. Expand Network Adapters and find the name of your network adapter.

3. make sure make a note of the adapter name in case something goes wrong.

4. Right click on your network adapter and uninstall it.

uninstall-network-adpatrer-2655239

5. If you request confirmation, select Yes / OK.

6. Restart your computer and try to reconnect to your network.

7. If you cannot connect to your network, it means that driver software it is not installed automatically.

8. You should now visit your manufacturer's web portal and download the driver from there.

download-driver-2655798

9. Install the driver and restart your computer.

By reinstalling the network adapter, you can get rid of this error ERR_NETWORK_CHANGED in Chrome.

Method 8: delete WLAN profiles

1. Open Symbol of the system. The user can perform this step by searching 'cmd' and then press Enter.

2. Now type this command in cmd and hit Enter: netsh wlan show profiles

netsh-wlan-show-profiles-8774540

3. Then write the following command and delete all the Wifi profiles.

netsh wlan delete profile name = "[PROFILE NAME]"

netsh-wlan-delete-profile-name-8863091

4. Follow the previous step for all Wifi profiles and then reconnect to your Wifi.

Recommended:

That's all you have with success Fix ERR_NETWORK_CHANGED in Chrome But if you still have any questions regarding this guide, feel free to ask in the comments section.

R Marketing Digital