Contenidos
RECOMMENDED: Click here to fix Windows errors and get the most out of your system performance
Even though we have already discussed PS4 error code NP-39225-1, PS4 error code CE-32930-7, and PS4 connection error CE-32889-0, the new type of error annoys users. At the moment, many users encounter problems when trying to connect their PS4 to a Windows computer via Remote Play. When they try, they will come across PS4 Remote Play Error Code 0x80001FFF. There can be several reasons why you are receiving this error code.
First of all, it may be because your antivirus or defender may prevent this app from performing its normal functions. Or it could also be an automatic connection failure. In some rare cases, the UPnP router can also be disabled, causing users to face this problem. Additionally, problems with port forwarding may indicate this problem. In this tutorial, we will show you how to fix all these problems and thereby fix PS4 remote play error 0x80001FFF. Consequences.
To correct the previously mentioned error, four different types of corrections are mentioned. There is no universal solution to this problem. In this way, you may have to test each problem until it is successful. Without further ado, here we go.
Check the network connection of the PlayStation 4 Remote Play.
The minimum connection speed required for remote playback is 5 Mbps for download and upload.
- Go to "Settings"> "Network"> "Check network connection" to see download and upload speeds.
- Check the status of the PSN service
Check the remote use network connection on your device
Run a network speed test on your device. The minimum connection speed required for remote playback is 5 Mbps for download and upload.
Make sure the NAT network type is 2 or less. Learn your NAT type by running the PS4 Remote Play application, then click on "Settings" and select the "Information" tab.
Disable third party intervention
According to some affected users, this issue may be due to some kind of interference caused by disabling an overprotected AV pack on their PS4 due to a false positive result.
If this scenario is applicable and you are using a third-party security package, you can quickly fix this problem by disabling real-time protection and preventing breaches.
In most third-party packages, this can be done directly with the icon on the taskbar. Right click on it and look for the option to disable real-time protection.
However, keep in mind that if you are using an antivirus package with a firewall, the same security rules may apply even after disabling third-party antivirus. In this circumstance, the only way to solve the problem is to completely erase the security package and delete all the remaining files.
Register manually
- Open PS4 Remote Play.
- In the lower left corner, click Register manually.
- You will be asked to enter the code. Go back to PlayStation 4 and go to "Settings"> "Remote Play Connection Settings".
- Select Add device. The codes are displayed on the screen. Write down the codes.
- Go back to Remote Play, enter the codes and click "Register".
RECOMMENDED: Click here to fix Windows errors and get the most out of your system performance
